while we were waiting for paint to dry on the previous project, liya started hauling out wood and asking me to build her a princess bed that was just her size. feeling bad that every one thinks the poor girl is a boy since she is still bald i complied since it would be a fairly quick build anyway.
we gathered up a bunch of odds and ends to see what would work. the “frilly” ones are christmas ornaments i got on sale at michaels. we have jumbo craft sticks, odds and ends of square dowels left over from other projects, a bag of balsa scraps, my miter box, saws, pencil and glue. after some testing we decided to start with the rectangular ornaments for the head/footboard, the dowels for supports and 4 craft sticks for slats as the balsa wood was just a smidge too short and narrow.
next we figured out how high the bed should be and marked the dowel supports against the end boards at that point
and marked the ends of the craft sticks so they would be square not curved
i wrapped some scotch tape around the craft sticks so that i could cut them all at once. then laid the bundle flat in my miter box and zipped off the ends. it is turned this way just to show how even it came out. (the miter box is really handy for people like me who don’t really know how to do wood work, and if you use your 40% off coupon at michaels it is less than $10… even in canada!. go on a separate day and use the coupon to get the matching saw that cheap as well ;))
center the trimmed supports across the very ends of the slats making sure everything is square and even, and glue down using weld bond, or wood glue.
and placed a heavy weight on top and wait for the glue to dry
Leave a Reply